This style of arm incorporates an external linkage to support the flexible tubing and hood. The wall mount and integral swivel
assembly is constructed of steel and allows 180 degree rotation. The hood swivel is constructed of a ball and socket joint allowing
complete positioning control. This arm can be made from 5 to 15 feet in length and either
4", 6", 8", or 10" diameters.
|
||
This style of arm incorporates an external linkage to support the flexible tubing and hood and can be either ceiling or wall
mounted. The swivel assembly is constructed of special plastic bearing material to swivel 360 degrees. This
arm can be made from 5 to 15 feet in length and either 4, 6, 8, or 10 inches in diameter.
|
||
Completely concealed internal linkage is used to support this arm’s Like the FAFE, this arm can be either ceiling or wall mounted
and will rotate a full 360 degrees. This arm is available in lengths from 5 to 15 feet and diameters of 6, 8, or 10 inches.
|
||
A rigid pipe section is used to extend the reach of the arm up to 15 or 20 feet. A standard FAFE arm (on the EAFE model) or an IAFE (on the IEAFE)
arm is then mounted on the extension pipe. When ceiling mounted as pictured left, the system swivels a full 360 degrees for maximum
versatility.
|
||
This Self-Supporting arm features cast aluminum joints with friction disks that are fully adjustable to the workers desired tension.
Smooth-bore pipe and external supports eliminate the obstructions in the airflow which traditional arms have, producing
outstanding suction power. This arm can be either ceiling or wall mounted.
They are available in a wide range of diameters, from 3” to 8”.
|
||
| Copyright © 2005 Ventaire. Email Website Administrator Email Ventaire |
||